Removal of MS2 bacteriophage using membrane technologies

J. Y. Hu, S. L. Ong, L. F. Song, Y. Y. Feng, W. T. Liu, T. W. Tan, L. Y. Lee, W. J. Ng

Research output: Contribution to journalArticle

25 Scopus citations

Abstract

Removals of MS2 bacteriophage virus using different membrane materials under different operating pressures were investigated. The results obtained in this study suggested that a better log removal in terms of MS2 bacteriophage virus could be achieved using Polyamide RO membrane under the optimum operating pressure of 100 psi. It is further noted that variable MS2 influent concentration levels resulted in corresponding variable log removals of the bacteriophages by the Polyamide RO membrane. The presence of MS2 bacteriophage virus in the effluent could possibly be due to leakage of bacteriophages through the membranes structure. Investigations using SEM and AFM showed that there were gaps or pores present in the membrane structure which were sufficiently large for the MS2 viruses to pass through.

Original languageEnglish
Pages (from-to)163-168
Number of pages6
JournalWater Science and Technology
Volume47
Issue number12
StatePublished - Aug 18 2003

    Fingerprint

Keywords

  • Acid test
  • MS2 bacteriophage virus
  • Membrane materials
  • Operating pressure

Cite this

Hu, J. Y., Ong, S. L., Song, L. F., Feng, Y. Y., Liu, W. T., Tan, T. W., Lee, L. Y., & Ng, W. J. (2003). Removal of MS2 bacteriophage using membrane technologies. Water Science and Technology, 47(12), 163-168.