Characterization of PDMS-Modified Glass from Cast-and-Peel Fabrication

Ke Liu, Yu Tian, Rajesekar Pitchimani, Michael Huang, Hawa Lincoln, Dimitrios Pappas

Research output: Contribution to journalArticlepeer-review

Abstract

In glass/poly(dimethylsiloxane) (PDMS) hybrid microfluidic chips, two different fabrication approaches are used: photolithographic or solid ink molds, or cast-and-peel methods. In the latter, a thin slab of PDMS is laid down and fluid channels are cut manually or by machine. The cast-and-peel approach has been used successfully for low-shear culture devices, among other applications. The main drawback, not reported to date, of cast-and-peel methods is that removal of PDMS (exposing the glass substrate) results in nanoscopic domains of PDMS still attached to the surface. This residual PDMS is not observable by eye, but affects the hydrophobicity of the device. Using contact angle measurement, atomic force and fluorescence microscopy, the changes in glass surfaces from the cast-and-peel technique were elucidated. This study demonstrates the enhanced protein (NeutrAvidin) adsorption on PDMS treated glass surfaces, and the potential influence of altered glass properties on microflui
Original languageEnglish
Pages (from-to)333-338
JournalTalanta
StatePublished - 2009

Fingerprint

Dive into the research topics of 'Characterization of PDMS-Modified Glass from Cast-and-Peel Fabrication'. Together they form a unique fingerprint.

Cite this