100 kV High Voltage Power Supply with Bipolar Voltage Output and adaptive Digital Control

Michael Giesselmann; Travis T Vollmer; William Carey

100 kV High Voltage Power Supply with Bipolar Voltage Output and adaptive Digital Control

Michael Giesselmann, Travis T Vollmer, William Carey

Electrical and Computer Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

Abstract— This paper presents a 100kV high frequency transformer / rectifier package which is capable of dual output polarity operation. An H-Bridge inverter drives the primary of the High Voltage (HV) transformer at a frequency of 20 kHz. The inverter is driven by a Microchip dsPIC33F digital signal controller using peak current mode control with adaptive slope compensation. The HV-tank has two HV-coax output cables with a grounded shield on each cable. If the center conductor of the coax cable designated as negative output is grounded, positive voltage is obtained from the coax cable designated as positive output and vice versa. This paper provides design details and experimental results from tests of the entire system.

Original language	English
Pages (from-to)	2913-2918
Journal	IEEE Transactions on Plasma Science
State	Published - Oct 2014

Fingerprint Dive into the research topics of '100 kV High Voltage Power Supply with Bipolar Voltage Output and adaptive Digital Control'. Together they form a unique fingerprint.

Cite this

@article{9330ac2f640a457cabf62fe35759e192,

title = "100 kV High Voltage Power Supply with Bipolar Voltage Output and adaptive Digital Control",

abstract = "Abstract— This paper presents a 100kV high frequency transformer / rectifier package which is capable of dual output polarity operation. An H-Bridge inverter drives the primary of the High Voltage (HV) transformer at a frequency of 20 kHz. The inverter is driven by a Microchip dsPIC33F digital signal controller using peak current mode control with adaptive slope compensation. The HV-tank has two HV-coax output cables with a grounded shield on each cable. If the center conductor of the coax cable designated as negative output is grounded, positive voltage is obtained from the coax cable designated as positive output and vice versa. This paper provides design details and experimental results from tests of the entire system.",

author = "Michael Giesselmann and Vollmer, {Travis T} and William Carey",

year = "2014",

month = oct,

language = "English",

pages = "2913--2918",

journal = "IEEE Transactions on Plasma Science",

publisher = "IEEE",

}

TY - JOUR

T1 - 100 kV High Voltage Power Supply with Bipolar Voltage Output and adaptive Digital Control

AU - Giesselmann, Michael

AU - Vollmer, Travis T

AU - Carey, William

PY - 2014/10

Y1 - 2014/10

N2 - Abstract— This paper presents a 100kV high frequency transformer / rectifier package which is capable of dual output polarity operation. An H-Bridge inverter drives the primary of the High Voltage (HV) transformer at a frequency of 20 kHz. The inverter is driven by a Microchip dsPIC33F digital signal controller using peak current mode control with adaptive slope compensation. The HV-tank has two HV-coax output cables with a grounded shield on each cable. If the center conductor of the coax cable designated as negative output is grounded, positive voltage is obtained from the coax cable designated as positive output and vice versa. This paper provides design details and experimental results from tests of the entire system.

AB - Abstract— This paper presents a 100kV high frequency transformer / rectifier package which is capable of dual output polarity operation. An H-Bridge inverter drives the primary of the High Voltage (HV) transformer at a frequency of 20 kHz. The inverter is driven by a Microchip dsPIC33F digital signal controller using peak current mode control with adaptive slope compensation. The HV-tank has two HV-coax output cables with a grounded shield on each cable. If the center conductor of the coax cable designated as negative output is grounded, positive voltage is obtained from the coax cable designated as positive output and vice versa. This paper provides design details and experimental results from tests of the entire system.

M3 - Article

SP - 2913

EP - 2918

JO - IEEE Transactions on Plasma Science

JF - IEEE Transactions on Plasma Science

ER -