James Yang

View Scopus Profile

James Yang

Calculated based on number of publications stored in Pure and citations from Scopus
1997 …2023

Research activity per year

Filter
Conference contribution

Search results

  • Conference contribution

    A fuzzy control strategy and optimization for four wheel steering system

    Zhang, J., Zhang, Y., Chen, L. & Yang, J., 2007, 2007 IEEE International Conference on Vehicular Electronics and Safety, ICVES. 4456359. (2007 IEEE International Conference on Vehicular Electronics and Safety, ICVES).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    20 Scopus citations

  • A fuzzy synthesis control scheme and optimization for vehicle dynamic stability system

    Zhang, Y., Gao, S., Li, L., Chen, L., Yang, J. & Abdel-Malek, K., 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 1959-1965 7 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 5 PART C).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • A hyper-redundant continuous robot

    Jingzhou, Y., Jason, P. & Abdel-Malek, K., 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006. p. 1854-1859 6 p. 1641976. (Proceedings - IEEE International Conference on Robotics and Automation; vol. 2006).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    19 Scopus citations

  • A literature survey of biodynamic models for whole body vibration and vehicle ride comfort

    Kumbhar, P. B., Xu, P. & Yang, J., 2012, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012. p. 671-687 17 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 6).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    19 Scopus citations

  • An alternative formulation for determining weights of joint displacement objective function in seated posture prediction

    Zou, Q., Zhang, Q., Yang, J., Boothby, R., Gragg, J. & Cloutier, A., 2011, Digital Human Modeling - Third International Conference, ICDHM 2011, Held as Part of HCI International 2011, Proceedings. p. 231-242 12 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 6777 LNCS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    2 Scopus citations

  • A new method for determining joint constraint forces and moments during optimal dynamic motion of redundant manipulators

    Kim, J. H., Yang, J. & Abdel-Malek, K., 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 161-172 12 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 5 PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Anterior cruciate ligament (ACL) injury: A literature review

    Aguilar, J. & Yang, J., 2017, 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), 67801. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Approaches to study spine biomechanics: A literature review

    Cruz, J., Yang, J. & Xiang, Y., 2019, Advances in Human Factors in Simulation and Modeling - Proceedings of the AHFE 2018 International Conferences on Human Factors and Simulation and Digital Human Modeling and Applied Optimization. Cassenti, D. N. (ed.). Springer-Verlag, p. 453-462 10 p. (Advances in Intelligent Systems and Computing; vol. 780).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • A review on human motion prediction in sit to stand and lifting tasks

    Chumacero-Polanco, E. A. & Yang, J., 2016, 36th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A-2016).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • ASSESSMENTS AND EVALUATION METHODS FOR UPPER LIMB EXOSKELETON - A LITERATURE SURVEY

    Lee, S., Xiang, Y., Xia, T. & Yang, J., 2022, 42nd Computers and Information in Engineering Conference (CIE). American Society of Mechanical Engineers (ASME), V002T02A021. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • CLOSED-FORM SWEPT VOLUME OF IMPLICIT SURFACES

    Abdel-Malek, K., Yang, J. & Blackmore, D., 2000, 26th Design Automation Conference. American Society of Mechanical Engineers (ASME), p. 509-514 6 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    7 Scopus citations

  • Cloth modeling and simulation: A literature survey

    Long, J., Burns, K. & Yang, J., 2011, Digital Human Modeling - Third International Conference, ICDHM 2011, Held as Part of HCI International 2011, Proceedings. p. 312-320 9 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 6777 LNCS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    12 Scopus citations

  • Cognitive-based terminal state prediction for human motion planning

    Howard, B., Yang, J. & Yang, G., 2013, 39th Design Automation Conference. American Society of Mechanical Engineers, V03BT03A022. (Proceedings of the ASME Design Engineering Technical Conference; vol. 3 B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Comparison of fatigue behaviors of spinal implants under physiological spinal loads: A finite element pilot study

    Xu, M., Yang, J., Lieberman, I. H. & Haddas, R., 2017, 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), 67783. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Computer-aided customized shape design of an N95 filtering facepiece respirator

    Lei, Z. & Yang, J., 2013, 39th Design Automation Conference. American Society of Mechanical Engineers, V03BT03A020. (Proceedings of the ASME Design Engineering Technical Conference; vol. 3 B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • Computing carbon dioxide and humidity in filtering facepiece respirator cavity during breathing cycles

    Lei, Z. & Yang, J., 2014, 34th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    9 Scopus citations

  • Contact area determination between a N95 filtering facepiece respirator and a headform

    Lei, Z. & Yang, J., 2011, Digital Human Modeling - Third International Conference, ICDHM 2011, Held as Part of HCI International 2011, Proceedings. p. 119-128 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 6777 LNCS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    1 Scopus citations

  • Contact pressure sensitivity analysis in N95 filtering facepiece respirator with strap location, friction, and headform material property

    Xu, M. & Yang, J., 2015, 35th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A-2015).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Control of hand prostheses- A literature review

    Cloutier, A. & Yang, J., 2013, 37th Mechanisms and Robotics Conference. American Society of Mechanical Engineers, V06AT07A016. (Proceedings of the ASME Design Engineering Technical Conference; vol. 6 A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    13 Scopus citations

  • COUPLED INTEGRAL SLIDING MODE CONTROL FOR BIDIRECTIONAL AUTOMATED PLATOON WITH AN EXPONENTIAL SPACING POLICY AND UNCERTAINTY APPROXIMATION

    Negash, N. M. & Yang, J., 2022, 24th International Conference on Advanced Vehicle Technologies (AVT). American Society of Mechanical Engineers (ASME), V001T01A005. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Design and analysis of an inherently-compliant light-weight active hand prosthesis

    Yang, J., Abdel-Malek, K., DeGraff, D. & Peña Pitarch, E., 2002, ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2002. p. 833-841 9 p. (ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2002; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    4 Scopus citations

  • Determining the static joint torques of a digital human model considering balance

    Yang, J., Kim, J. & Xiang, Y., 2010, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART A ed. p. 399-409 11 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009; vol. 7, no. PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    13 Scopus citations

  • Development of the virtual-human Santos™

    Abdel-Malek, K., Yang, J., Kim, J. H., Marler, T., Beck, S., Swan, C., Frey-Law, L., Mathai, A., Murphy, C., Rahmatallah, S. & Arora, J., 2007, Digital Human Modeling - First International Conference on Digital Human Modeling, ICDHM 2007. Held as Part of HCI International 2007, Proceedings. p. 490-499 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4561 LNCS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    26 Scopus citations

  • Does perceived harm underlie effects of vehicle size on overtaking judgments during driving?

    Levulis, S. J., Delucia, P. R., Yang, J. & Nelson, V., 2018, 62nd Human Factors and Ergonomics Society Annual Meeting, HFES 2018. Human Factors and Ergonomics Society Inc., p. 1384-1388 5 p. (Proceedings of the Human Factors and Ergonomics Society; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • Driver accommodation assessment using physics-based posture prediction model

    Burak, O. & Yang, J., 2013, Proceedings of the FISITA 2012 World Automotive Congress. VOL. 7 ed. Springer-Verlag, p. 665-675 11 p. (Lecture Notes in Electrical Engineering; vol. 195 LNEE, no. VOL. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Dynamic motion generation for redundant systems under external constraints

    Kim, J. H., Abdel-Malek, K., Xiang, Y., Yang, J. & Arora, J. S., 2010, ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010. PARTS A AND B ed. p. 1539-1546 8 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Dynamic responses of beam with sloping support traversed by a moving mass

    Yang, G., Yang, J., Qiang, C., Ge, J. & Chen, Q., 2010, ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010. p. 783-789 7 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Effect of uncertainty on human posture prediction

    Li, N. & Yang, J., 2014, 34th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Efficient zmp formulation and effective whole-body motion generation for a human-like mechanism

    Kim, J. H., Xiang, Y., Bhatt, R., Yang, J., Chung, H. J., Patrick, A., Arora, J. S. & Abdel-Malek, K., 2009, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART B ed. p. 1073-1084 12 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; vol. 2, no. PART B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    9 Scopus citations

  • Fall prevention therapies for individuals with stroke: A survey

    Chumacero-Polanco, E. A. & Yang, J., 2017, 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), 67456. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • FATIGUE PREDICTION FOR REPETITIVE LIFTING

    Barman, S., Xiang, Y., Rakshit, R. & Yang, J., 2023, 43rd Computers and Information in Engineering Conference (CIE). American Society of Mechanical Engineers (ASME), v002t02a034. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Finite element analysis of piezoelectric strips for modifying ankle torques in active prosthetic feet - A pilot study

    Powelson, T. & Yang, J., 2012, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012. PARTS A AND B ed. p. 133-141 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 4, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Finite element method-based analysis for effect of vibration on healthy and scoliotic spines

    Xu, M., Yang, J., Lieberman, I. H. & Haddas, R., 2016, 12th International Conference on Multibody Systems, Nonlinear Dynamics, and Control. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 6).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    11 Scopus citations

  • Force optimization approaches for common anthropomorphic grasps

    Cloutier, A. & Yang, J., 2016, 36th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A-2016).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Ground reaction forces for various standing tasks considering generic terrain

    Howard, B. & Yang, J., 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B ed. p. 1211-1219 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 6, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • Human facial soft tissue thickness and mechanical properties-a literature review

    Xu, M. & Yang, J., 2015, 35th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A-2015).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    8 Scopus citations

  • Human Head Modeling and Personal Head Protective Equipment: A Literature Review

    Yang, J., Dai, J. & Zhuang, Z., 2009, Digital Human Modeling - Second International Conference, ICDHM 2009 - Held as Part of HCI International 2009, Proceedings. p. 661-670 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5620 LNCS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    4 Scopus citations

  • Human-inspired balance control of a humanoid on a rotating board

    Chumacero, E. & Yang, J., 2019, Advances in Human Factors in Robots and Unmanned Systems - Proceedings of the AHFE 2018 International Conference on Human Factors in Robots and Unmanned Systems, 2018. Chen, J. (ed.). Springer-Verlag, p. 115-126 12 p. (Advances in Intelligent Systems and Computing; vol. 784).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • Human stair ascent and descent simulations

    Xiang, Y., Chung, H. J., Kwon, H. J., Kim, J. H. & Yang, J., 2014, 34th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Human upper body motion prediction

    Abdel-Malek, K., Yang, J., Mi, Z., Patel, V. C. & Nebel, K., 2004, Proceedings of the IASTED International Conference on Applied Simulation and Modelling. Hamza, M. H. (ed.). p. 571-576 6 p. 443-075. (Proceedings of the IASTED International Conference on Applied Simulation and Modelling).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    16 Scopus citations

  • HYBRID PREDICTIVE MODEL FOR ASSESSING SPINAL LOADS FOR 3D ASYMMETRIC LIFTING

    Zaman, R., Quarnstrom, J., Xiang, Y., Rakshit, R. & Yang, J., 2022, 42nd Computers and Information in Engineering Conference (CIE). American Society of Mechanical Engineers (ASME), V002T02A022. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Identifying possible patient slips and falls using motion capture experiments

    Cloutier, A., Yang, J., Pati, D., Valipoor, S., Snailer, B. & Hollers, J., 2015, 35th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A-2015).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • In-plane flexible ring tire model validation through ADAMS FTire model virtual tests

    Li, B., Yang, X., Jin, A., Zhang, Y. & Yang, J., 2015, 17th International Conference on Advanced Vehicle Technologies; 12th International Conference on Design Education; 8th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • In-plane rigid ring-based tire model: Parameter identification, sensitivity analyses, and effect on ride comfort

    Li, B., Li, N., Yang, X. & Yang, J., 2014, 16th International Conference on Advanced Vehicle Technologies; 11th International Conference on Design Education; 7th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • Joint-Based Metabolic Energy Expenditure for Physiology Simulation in Digital Human Avatars

    Tuer, G. M., Pickle, N. T., Broyles, N., Yang, J., Middle, R. J., Zientara, G. P. & Roos, P. E., 2023, Advances in Digital Human Modeling - Proceedings of the 8th International Digital Human Modeling Symposium. Scataglini, S., Saeys, W., Truijen, S. & Harih, G. (eds.). Springer Science and Business Media Deutschland GmbH, p. 11-19 9 p. (Lecture Notes in Networks and Systems; vol. 744 LNNS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Joint Coupling for Human Shoulder Complex

    Yang, J., Feng, X., Kim, J. H., Xiang, Y. & Rajulu, S., 2009, Digital Human Modeling - Second International Conference, ICDHM 2009 - Held as Part of HCI International 2009, Proceedings. p. 72-81 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5620 LNCS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    2 Scopus citations

  • Joystick ergonomic study in material handling using virtual humans

    Pitarch, E. P., Yang, J., Abdel-Malek, K., Kim, J. & Marler, T., 2005, American Society of Mechanical Engineers, Manufacturing Engineering Division, MED. p. 1415-1420 6 p. (American Society of Mechanical Engineers, Manufacturing Engineering Division, MED; vol. 16-2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Lifting motions during patient repositioning in novice and experienced nurses: A pilot study

    Holmes, A., Opella, J., Cloutier, A., Yang, J. & DeLucia, P. R., 2016, 36th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A-2016).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Lifting posture analysis in material handling using virtual humans

    Kim, J. H., Abdel-Malek, K., Yang, J., Marler, T. & Nebel, K., 2005, American Society of Mechanical Engineers, Manufacturing Engineering Division, MED. p. 1445-1453 9 p. (American Society of Mechanical Engineers, Manufacturing Engineering Division, MED; vol. 16-2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    6 Scopus citations

  • Load-effective dynamic motion planning for redundant manipulators

    Kim, J. H., Yang, J. & Abdel-Malek, K., 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 1151-1164 14 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 8 PART B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations